SHOP SERVICES

MACHINE SHOP
Need a valve job, milling services, welding, cleaning, or other cylinder head machine work? Total Engine Airflow is a full service cylinder head machine shop.

Standard Shop Labor rate $75.00 per Hour
Custom Serdi Valve job $175.00 and up
Grind seats, margins,backcuts on valves $2.00 ea and up
Remove and replace valve guides $4.00 ea.
Diamond hone guide $4.00 ea.
CC Combustion Chamber – $10
CC Intake Port – $25
Bead Blast Head – $10
Drill Bolt Holes to 1/2″ – $25
Head Assembly – $60 (most heads) clean, set spring heights
Angle Mill Heads .100″ – $200
Mill Heads up to .010″ – $65
Mill Heads up to .050″ – $75
Mill Heads up to .100″ – $100
Mill Intake up to .010″ – $50
Mill Intake up to .050″ – $75
Mill Intake up to .100″ – $100
O-ring Heads with .041″ Stainless Wire – $125
Cut Receiver Grooves for Fel-Pro Loc-Wire Gasket – $125
Cut Receiver Grooves for O-ring Block – $125
Vacuum Check Heads – $20
Intake Manifold Port Matching – $300 + necessary intake gasket set cost.
Please call for other Machining Services.

FLOW TESTING
Our flowbench is an extremely important part of our cylinder head production process. As we develop a head, we can obtain data on the volume and velocity of the air flowing through the various parts of the head. The testing is precise enough to allow us to see the airflow around sections of the perimeter of each valve in a head. Remember, a great head doesn’t just produce good peak flow numbers… it’s all about area under the curve. We can flow test any head, if you’d like to know how your heads stack up.

Flow Head – $75.00 intake and exhaust

Total Engine Airflow cares about your engine build, we want to assist you with technical advise, experience, and skilled machine work. If you do not see what you’re looking for, or if you have any questions; give us a call at 330-634-2155
or send us an email at sales@totalengineairflow.com